[if gte mso 9]>
Subject: Re: [edk2] RAID Controllers and LSI Protocol
From: "Tian, Feng" <firstname.lastname@example.org>
To: "email@example.com" <firstname.lastname@example.org>
Date: 2012-10-08 11:12:56
UEFI defined EFI_ATA_PASS_THRU_PROTOCOL interface for RAID mode. But because the RAID implementation is vendor specific, you should ask the RAID adaptor vendor to see if they support >UEFI 2.2 and provide UEFI RAID oprom to allow user access UEFI interface.
From: Fernando J V da Silva [mailto:email@example.com]
Sent: Tuesday, October 02, 2012 02:59
Subject: [edk2] RAID Controllers and LSI Protocol
I'm trying to develop an UEFI application aiming to send LSI commands to a LSI MegaRaid Controller. However, I couldn't find any protocol for RAID on UDK. Is there any?
If not, as far as I read about it, it seems I should use some driver which could pass through the commands to such device using PCI-e interface. Does anybody have any experience on it and could share some thoughts?
Fernando J V da Silva
+55 15 8801-2165